Record the interface, not just the finish

Measure the closed-door overlay at the hinge side, count the hinges, photograph the door edge and cabinet frame, and record the existing cup or surface-mount arrangement. Note whether the door is full overlay, half overlay, or inset. The manufacturer’s diagram should control the final distinction.

Measurement Record Why it matters
Overlay Door overlap on the frame Sets the hinge geometry.
Door position Full overlay, half overlay, or inset Changes the mounting path.
Cup/interface Size and edge distance if present Prevents a near-match that cannot seat.
Plate and screws Hole spacing and plate style Determines whether the cabinet side accepts it.
Motion Opening angle and nearby obstructions Prevents handles or doors colliding.

Do not drill new holes until the replacement instructions confirm the location and the cabinet material can accept them. A hinge that “almost fits” can still leave the door rubbing, sagging, or unable to close.

Limits

This worksheet does not identify a universal hinge size or guarantee compatibility with a particular cabinet line. Exact manufacturer drawings and the existing cabinet construction control the purchase.